Frequently Asked Questions
Q: Which receptacle is used to plug in the battery charger, and which is for the remote control?
A: It does not matter. Either receptacle can be used to plug in the battery charger or the remote control.
Q: I need to lift a unit that weighs over 1,500lbs? Is there a way Pro-Lift can do this?
A: Yes. Multiple pairs of Pro-Lifts can be used on heavier units, although the turning radius will be increased. The Pro-Lifts should be placed as close to each other as possible.
Q: What are the Z angle adapters for?
A: Some package units are not equipped with the proper forklift rails (with slots that have an upper lip for the Pro-Lifts to attach). Install the adapters by slipping the bottom edge underneath the a/c unit at the center of gravity. They will need to be held in place with self-tapping screws (#12 or 1/4″ x 1″). Use at least 4 screws for smaller units, more for units weighing over 500 lbs.
Q: Is there a proper way to store the Pro-Lift when not in use?